RTLS Active Tag

Description

Marvelmind Indoor Navigation System is an off-the-shelf indoor navigation system designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), and copters. It is also used to track other objects that the mobile beacon installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, etc.

The navigation system is based on stationary ultrasonic beacons that are united by radio interface in a license-free band (433MHz or 915MHz). The location where a mobile beacon installed is calculated based on the propagation delay of an ultrasonic signal (Time-Of-Flight or TOF) to a set of stationary ultrasonic beacons using trilateration.

Key requirements for the proper system functionality:

  • For 3D (X, Y, Z) tracking – An unobstructed sight by a mobile beacon of three or more stationary beacons simultaneously
  • For 2D (X, Y) tracking – An unobstructed sight by a mobile beacon of two stationary or more stationary beacons simultaneously
  • Distance to the nearest 2 or 3 beacons – not more than 30 meters (recommended). In ideal conditions – up to 50 meters

 

Download page : https://marvelmind.com/download/ (Instruction step by step,driver and latest Software)

Distributors Page : https://marvelmind.com/#distributors

 

Technical Details

Distance between beacons

  • Reach up to 50 meters in lab conditions
  • Recommended distance is 30 meters (Transducer4 to Transducer4 looking straight at each other and other transducers are off)

Coverage area

  • Reach up to 1000 m2 with the Starter Set configurations
  • Coverage for larger territories is similar to cellular networks

Location precision

  • Absolute: 1–3% of the distance to the beacons
  • Differential precision: ±2 cm

Location update rate

  • 0.05–45Hz
  • Can be set manually
  • Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
  • Depends on the number of mobile beacons: for example, update rate of 25Hz for 1 mobile beacon will result in update rate of 25Hz/2 for 2 mobile beacons, and 25Hz/3 – for 3 mobile beacons, etc
  • Depends on the radio interface profile (500kbps vs. 38kbps)
  • Slightly depends on the number of stationary beacons — different than for mobile beacons

Power supply

Internal:

  • LiPol battery 1000mAh
  • Battery lifetime depends on usage
  • Stationary beacon with 16Hz update rate => up to 72h (tested)
  • Stationary beacon with 1Hz update rate => ~72h*16 => 1 month
  • Mobile beacon with 8Hz update rate – 12h (tested)

External:

  • microUSB – recommended for permanent use

Weight

Mobile beacon from Starter Set:

  • 59 grams (including battery 1000mAh and housing and antenna 50mm)
  • 27 grams (bare board w/o battery)

Beacon size

  • 55x55x33 mm (with 50mm antenna: 55x55x65mm)

 

 

Visitors: 2,112,103